Sauder Edge Water 414844 Instrucciones De Ensamblaje página 13

Step 9
Fasten three METAL BRACKETS (4G) to the UPPER MOLDING (V) as shown in the upper diagram. Use three BLACK
å
9/16" LARGE HEAD SCREWS (1S).
Fasten four METAL BRACKETS (4G) to the BOTTOM (F2) as shown in the lower diagram. Use four BLACK 9/16" LARGE
å
HEAD SCREWS (1S).
Fasten the UPPER MOLDING (V) to the ENDS (A and B) and UPPER UPRIGHT (C). Use three BLACK 9/16" LARGE HEAD
å
SCREWS (1S) through the METAL BRACKETS (4G) and into the ENDS and UPRIGHT.
Fasten the BOTTOM SKIRT (N) to the BOTTOM (F2). Use four BLACK 9/16" LARGE HEAD SCREWS (1S) through the
å
METAL BRACKETS (4G) and into the SKIRT.
BLACK 9/16" LARGE HEAD SCREW
(14 used in this step)
Finished surface
Flat edge
4G
www.sauder.com/services
V
1S
V
B
N
F2
4G
C
414844
A
Page 13
4G