Safety Guidelines; Important Safety Instructions - Craftsman 919.195410 Manual De Operación

Model No.
Max. Developed HP
Bore
Stroke
Voltage-Single Phase
Minimum Branch Circuit Requirement
Fuse Type
Air Tank Capacity
Approximate Cut-in Pressure
Approximate Cut-out Pressure
SCFM @ 40 psig
SCFM @ 90 psig
Refer to Glossary for abbreviations
SAFETY GUIDELINES - DEFINITIONS
This manual contains information that is important for you to know and under-
stand. This information relates to protecting YOUR SAFETY and PREVENTING
EQUIPMENT PROBLEMS. To help you recognize this information, we use the
symbols below. Please read the manual and pay attention to these symbols.
uation which, if not avoided, will
result in death or serious injury
Indicates a potential-
ly hazardous situa-
tion which, if not avoided, could
result in death or serious injury.

IMPORTANT SAFETY INSTRUCTIONS

known (to the State of California) to cause cancer, birth defects or other repro-
ductive harm. Some example of these chemicals are:
G
lead from lead-based paints
G
crystalline silica from bricks and cement and other masonry products
G
arsenic and chromium from chemically-treated lumber
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well venti-
lated area, and work with approved safety equipment, always wear
MSHA/NIOSH approved, properly fitting face mask or respirator when using
such tools.
When using air tools, basic safety precautions should always be followed to
reduce the risk of of personal injury.
SPECIFICATION TABLE
Indicates an immi-
nently hazardous sit-
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals
919-195410
6.0
2.875"
2.0"
120/240
15 amps
Time Delay
25 gallons
120
150
8.6
6.8
.
tion which, if not avoided, may
result in minor or moderate injury.
.
indicates a potentially hazardous
situation which, if not avoided, may
result in property damage.
3- ENG
Indicates a potential-
ly hazardous situa-
Used without the
safety alert symbol
D24910