Glossary; Accessories; Duty Cycle - Craftsman 919.195410 Manual De Operación

Become familiar with these terms
before operating the unit.
CFM: Cubic feet per minute.
SCFM: Standard cubic feet per
minute; a unit of measure of air deliv-
ery.
PSIG: Pounds per square inch
gauge; a unit of measure of pressure.
Code Certification: Products that
bear one or more of the following
marks: UL, CUL, ETL, CETL, have
been evaluated by OSHA certified
independent safety laboratories and
meet the applicable Underwriters
Laboratories Standards for Safety.
Cut-In Pressure: While the motor is
off, air tank pressure drops as you
continue to use your accessory.
This unit is capable of powering the following Accessories. The accessories are
available through the current Power and Hand Tool Catalog or full-line Sears
stores.

Accessories

• In Line Filter
• Tire Air Chuck
• Quick Connector Sets (various
sizes)
• Air Pressure Regulators
This air compressors should be oper-
ated on not more than a 50% duty
cycle. This means an air compressor
that pumps air more than 50% of one
hour is considered misuse, because

GLOSSARY

When the tank pressure drops to a
certain low level the motor will restart
automatically. The low pressure at
which the motor automatically
restarts is called "cut-in" pressure.
Cut-Out Pressure: When an air
compressor is turned on and begins
to run, air pressure in the air tank
begins to build. It builds to a certain
high pressure before the motor auto-
matically shuts off, protecting your air
tank from pressure higher than its
capacity. The high pressure at which
the motor shuts off is called "cut-out"
pressure.
Branch Circuit: Circuit carrying elec-
tricity from electrical panel to outlet.
ACCESSORIES
•
•
Refer to the selection chart located
on the unit to select the tools this unit
is capable of powering.

DUTY CYCLE

the air compressor is undersized for
the required air demand. Maximum
compressor pumping time per hour is
30 minutes for a 50% duty cycle.
9- ENG
Oil Fog Lubricators
Air Hose:1/4", 3/8" or 1/2" inside
diameter in various lengths
D24910