Electric Scheme; Vl6A Box Dimensions - Harman JBL Professional VL6A Guia Del Usuario

01) ON/OFF – Key that turns the amplifier on or off;
02) LIFT/GND – Key that turns on or off the electrical ground of the amplifier chassis;
03) OUT – Balanced XLR line output (Never interconnect more than 04 parallel boxes);
04) IN – XLR balanced line input;
05) VOLUME – This potentiometer adjusts the gain of the amplifier;
06) POWER – This LED indicates that the amplifier is on;
07) CLIP – This LED, when flashing slightly, indicates that the amplifier is operating at its distortion limit.
(Never operate with this LED lit or with severe clip);
08) SIGNAL - This LED indicates that the signal is reaching the amplifier;
09) PROTECTION – This LED indicates that the amplifier has come into protection;
10) AC OUT – AC power output (Never interconnect more than 04 boxes in parallel);
11) AC IN - AC power input;
12) 127/220V-50/60Hz – Voltage selector switch;
13) The fuse of this product is located on the inside of the amplifier. If there is a need for exchange, it
should be taken to a technical service.
AMPLIFIER

VL6A BOX DIMENSIONS

19
ELECTRICAL SCHEME