Auger Grabbing Stomper Instructions - Weston BUTCHER Serie Manual Del Usuario

AUGER GRABBING STOMPER INSTRUCTIONS

w WARNING Electrical Shock Hazard. Disconnect power before
cleaning, disassembling, or assembling. Do not immerse cord, plug, or motor
in water or other liquid.
To use the stomper to disassemble
the head of the meat grinder, follow
these instructions:
1. Unscrew the front ring nut.
2. Attach the handle end of the
stomper onto the auger pin. The
opening on the stomper should
completely secure around the
groove in the pin (FIGURE 12).
3. Pull the stomper toward yourself,
and away from the grinder. The
auger will begin to disengage from
the head of the grinder.
4. Use the hand that is not holding
the stomper to guide the auger out
from the head completely.
5. The auger, grinder knife and
plate are all now free from the head
and can be cleaned appropriately
(FIGURE 13).
Stomper
Auger Pin
Front Ring Nut
Auger
Knife
Plate
FIGURE 12
FIGURE 13
Head
13