Descargar Imprimir esta página

Working With Two Connected Devices; Basic Usage Of Your Jabra Bt8010 Headset; Using Your Jabra Bt8010 Headset For Phone Calls - Jabra BT 8010 Manual De Usuario

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
To switch between Phone and Music mode please tap the mode button. If
GB
you are wearing the headset, you will receive an audio notification that the
mode has changed.
F
Note: If you start a music session from your music player, the headset will
ES
automatically change into Music mode.
Note: If you accept a call in Music mode the headset automatically changes to
PT
Phone mode. When you terminate the call, the headset will return to Music mode.
Depending on the music device, the music will automatically resume.
DE

7. Working with two connected devices

IT
Your Jabra BT8010 lets you connect to two devices for phone and music
NL
features. Please note that the BT8010 will have different rights in terms of
controlling these two devices.
SU
Primary device
NO
Phone features
• Answer call
• End call
• Reject call*
SE
• Voice dialing*
• Last number redialing*
DK
• Call waiting*
• Put call on hold*
GR
• Volume control
Music features
• Play/Pause music*
• Stop music*
• Skip track forward*
• Volume control
* Phone/device dependent
Note: The last paired device is automatically set as your primary device. If you
would like to change your secondary device to your primary device, please press
and hold the mode button. You will receive an audio notification indicating that
the primary device has shifted.
Note: The primary and secondary device will be listed in the BT8010 display,
with the primary device listed at the top.
10
Secondary device
• Answer call
• End call
• Reject call*
• Call waiting*
• Put call on hold*
• Volume control
• Headset
automatically plays
music, if initiated from
the secondary device
• Volume control
R ELE ASE YOUR JA BR A

8. Basic usage of your Jabra BT8010 headset

1. Locking the headset
• Press and hold the menu button to lock/unlock the headset controls
2. Wake up display
• Tap the menu button (if locked, please unlock the headset first)
3. Show caller ID
To protect your privacy, Caller ID is set to "On demand" by default. In this
mode Caller ID will not be indicated, unless you specifically request it during
an incoming call.
• During an incoming call, tap the menu button
Note: If you would like to activate Caller ID for all incoming calls, you can do so
by accessing the menu, select Settings – Display – Caller ID - On.
4. Volume control
• Your Jabra BT8010 headset features an automatic volume control that
adjusts the volume depending on the ambient noise level. For manual
adjustment, turn the jog wheel clockwise to increase the volume or
counter clockwise to decrease the volume (right side wearing).
Note: If the headset is set for left side wearing, the volume control is inverted
(e.g. the volume is increased with a counter clockwise movement).
9. Using your Jabra BT8010 headset for
phone calls
The operation of the basic call features is very similar to your mobile phone.
1. To answer a call
• You answer a call directly on the headset with a tap on the Answer/End
button. A simple tap on the headset's Answer/End button will capture
and transfer the call to the headset
2. To end or reject a call
• A tap on the Answer/End button terminates the active call
• You can also reject an incoming call directly from the headset. Press the
Answer/End button and the call will be rejected. Depending on your
mobile phone settings, the caller will either be forwarded to your voice
mail or hear a busy signal
Jabra BT8010 Bluetooth headset
GB
F
ES
PT
DE
IT
NL
SU
NO
SE
DK
GR
11

Publicidad

loading