MN007262A01-AD
Chapter 4: Installation Details for Standard Configurations
Figure 10: Below Dash Trunnion Mounting
Label
1
2 and 4
3 and 5
4.2.2
Locking Kit (Optional)
If an optional locking kit is used, refer to the following steps to install locking kit for all radio types.
4.2.2.1
Installing Locking Kit for All Radios
Procedure:
1 Position the lock bottom housing on the trunnion before installing the radio mounting screws.
2 Slip the top lock housing on and remove the key.
3 Install the lock on either side of the radio.
18
1
2
3
Description
Trunnion
Wing Screw
Lock Washer
5
4