Descargar Imprimir esta página

Installing The Antenna; Figure 14: Antenna Connections On The Back Of The Radio - Motorola WAVE TLK 150 Guia De Instalacion

Ocultar thumbs Ver también para WAVE TLK 150:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 241
MN007262A01-AD
Chapter 4: Installation Details for Standard Configurations
4.7.1

Installing the Antenna

CAUTION: Do not interfere, or restrict driving or airbag operations when installing the antenna.
NOTICE: Do not install the LTE antenna and GNSS antenna outside of the vehicle.
Procedure:
1 Mount the antenna according to the instructions provided with the antenna kit. Run the coaxial
cable to the radio mounting location.
NOTICE: Do not mount the antenna on metal surface.
2 Connect the antenna cable connector to the radio antenna connector on the rear of the radio.

Figure 14: Antenna Connections on the Back of the Radio

Label
1
2
3
4
5
6
7
3 Connect the two LTE antenna ports which consist of Main and Diversity to the Main SMA
connector (red) and Diversity SMA connector (blue) respectively.
4 Connect the GNSS antenna to the GPS antenna SMA connector (yellow) on the rear of the
radio.
24
1
2
3
4
Description
Main LTE Antenna Connector (Red)
LTE Diversity Antenna Connector (Blue)
GNSS Antenna Connector (Yellow)
Antenna Cable Plug
Main Antenna Cable
DIV Antenna Cable
GNSS Antenna Cable
7
6
5

Publicidad

loading