Descargar Imprimir esta página

Leister SONORA S1 Manual Del Usuario página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
Application
Shrinking of shrinkdown tubing, solder connectors and solder terminals, packaging
and electrical components.
Car wrapping wrapping the vehicle with printed adhesive film
Soldering and unsoldering of tin, special silver solder, SMD components, cable
shoes, solder shrink sleeves and removal of solder connections.
Deforming of articles made from acrylic, PVC, and polystyrene, tubing, plates and
profiles, as well as moist woods.
Drying of colour shade samples, filler, adhesives, construction joints and stucco
forms.
Paint removal, removal of old and even thick coatings of oil paint, varnish and
synthetic plaster.
Defrosting of icy stairs and steps, door locks, trunk lids, car doors or water pipes,
as well as for defrosting refrigerators and ice boxes.
Activating / dissolving solvent-free and hot-melt adhesives.
Igniting of wood chips, paper, coal or straw.
Disinfection with hot air of 600 °C, you can quickly rid animal sties / stables of
bacteria. Woodworm infestation can be controlled (Caution: Danger of fire ! Do not
heat up the wooden surface excessively).
Joining adhesives – Large-surface gluing with contact adhesives, activation of
pressure-sensitive adhesives, acceleration of bonding processes, releasing of
bonding points as well as releasing or bonding of edge band or venee.
10
Leister SONORA S1 / Hot Air Tool
Translation of the original operating instructions
Application / Accessories
1
2
Shrinking
Car wrapping
Soldering / unsoldering
Deforming
Drying
Paint removal
Defrosting
Activating / dissolving
Igniting
Disinfection
Joining adhesives
Note: The nozzle selection shown in the illustration is recommended by Leister. Other
applications of the nozzle selection are possible according to requirements.
1
Glass protection nozzle
2
Wide slot nozzle 50 mm
Reducer nozzle
3
Reflector nozzle
4
Tubular nozzle 5 mm
5
6
Wide slot nozzle 20 mm
7
Solder sleeve reflector
Only Leister accessories should be used
3
4
5
6
Art.- Nr. 119.269
Art.- Nr. 119.270
Art.- Nr. 119.314 (included in delivery)
Art.- Nr. 119.271 (included in delivery)
Art.- Nr. 119.316
Art.- Nr. 119.315
Art.- Nr. 119.312 (included in delivery)
7

Publicidad

loading