Getting Started; Controls, Displays, And Accessories - estech COBRA 604-4810B Instrucciones De Uso

430-11902-02 Rev N
Place patient return electrode's according to the manufacturer's
o
instructions.

4. GETTING STARTED

Contents
The ESU's shipping carton contains the components identified below:
•
1ea – ESU
•
1ea– Power Cord
•
1ea – System Operator's Manuals
To unpack the ESU, follow these steps:
1. Unpack the ESU carefully and inspect visually for damage.
2. Notify the carrier immediately if the shipment carton is damaged.
3. Verify that the shipping package contains all items listed above and
on the packaging list are received.
If the unit or any accessories are damaged, notify AtriCure's Customer Service
immediately. Do not use any damaged equipment. Refer to Section 13 for
returning the shipment to AtriCure.

5. CONTROLS, DISPLAYS, AND ACCESSORIES

Front Panel
The operator controls for the System are located on the front panel of the
ESU. The buttons on the ESU's front panel allow the user to control the
operation of the ESU. The lights/LEDs on the front panel show the ESU's
status and/or report error conditions. This section describes the operator
controls on the front panel (shown in Figure 5-1).
WARNING
Do not open unit. Electrical shock
hazard.
Page 10 of 411