Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push six SAUDER TWIST-LOCK®
å
FASTENERS (7F) into the large holes in the TOP (C2).
Open the FURNITURE TIPPING RESTRAINT KIT (97)
å
and fasten the SAFETY STRAP to the TOP (C2 ). Use the
provided BLACK 9/16" LARGE HEAD SCREW.
www.sauder.com/services
Do not tighten the TWIST-LOCK® FASTENERS in this step.
7F
7F
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=2418
to watch a video on how to assemble your unit.
Safety strap
BLACK 9/16" LARGE HEAD SCREW
C2
411985
(1 used in this step)
7F
97
Page 5
Publicidad
