Pre-Installation; Tools Required; Materials Required (Not Included) - K2 Pumps SPP03301K Manual Del Propietário

20. This pump is made of high-strength, corrosion-resistant materials. It will provide trouble-free service for a long
time when properly installed, maintained, and used. However, inadequate electrical power to the pump, dirt, or
debris may cause the pump to fail. Please carefully read the manual and follow the instructions regarding
common pump problems and remedies.

PRE-INSTALLATION

APPLICATION
The non-submersible pedestal sump pump is designed for sump water removal applications. It is not engineered

to be run continuously as a "fountain" or "waterfall" pump.

TOOLS REQUIRED

Flathead
Screwdriver
Cable Ties

MATERIALS REQUIRED (NOT INCLUDED)

NOTE:
Parts shown below not to scale.
Threaded Adapter
(Pipe to Pump)
1-1/4"
or 1-1/2".
check valve
For Professional Technical Support call 1-844-242-2475
Phillips
Screwdriver
Channel
Locks
Safety goggles
1-1/4'' or 1-1/2''
ABS or PVC Pipe
ABS or PVC Cement
(to match the pipe)
Pipe wrench
Tape Measure
Thread Tape
1-1/4". or 1-1/2".90°
Elbow
Hacksaw
3