Pre-Installation Instructions; Connection Options - Dometic MagicWatch WPS 900F Manual Del Usuario

Pre-installation instructions

4 Pre-installation instructions
4.1

Connection options

MagicWatch WPS900F and MagicWatch WPS910 can process either digital speed
signals from the CAN bus (CAN bus connection on the loudspeaker) or an analogue
speed signal (analogue connection on the front control electronics) to activate the
front parking aid. A CAN bus connection is not possible in all vehicles with a CAN
bus.
I
NOTE for vehicles with CAN bus
• The vehicle-specific product overview on the homepage will tell you
whether a CAN bus connection is possible your vehicle.
"http://www.dometic.de/product/waeco-magicwatch-wps-
910",
or call us and ask (for the contact information, please see the back of
the instructions).
• If your vehicle features a CAN bus, but the vehicle list states that a
CAN bus connection is not possible, MagicWatch WPS900F or
WPS910 must be connected using a analogue connector. This will
require analogue transmission of the speed signal.
If the vehicle does not provide a speed signal which is compatible (neither by CAN
bus nor analogue), the front parking aid must be activated and deactivated using the
timer function or the switch (see chapter "Setting the system" on page 14).
8
WPS900F/WPS910
EN