Cybex Platinum SIRONA Z i-SIZE Guía De Usuario página 8

Ocultar thumbs Ver también para SIRONA Z i-SIZE:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
CERTIFICATION
Module Sirona Z i-Size
45cm – 105cm / ≤ 18kg
SIRONA Z i-Size
EN
UN R129/02
Size range: 45-105 cm
Weight: max. 18 kg
CYBEX Base Z One
Riedingerstr. 18, 95448 Bayreuth
Thank you for deciding on the Sirona Z i-Size when choosing your car seat.
Carefully read this User guide before installing the car seat in your vehicle and
always keep the guide to hand in the designated compartment.
IMPORTANT INFORMATION AND WARNINGS
Without the approval of the Type Approval Authority, the car seat may not be
modified or added to in any way.
In order to keep your child properly protected, it is absolutely essential that
you use the car seat as described in this User guide.
Do not use forward facing before the child's age exceeds 15 months and
before the child has reached a size of 76 cm.
This car seat may only be installed on vehicle seats which are approved for the
use of child restraint systems according to the vehicle manual.
The installation of this car seat on the front passenger seat with the front
airbag activated is NOT PERMITTED.
Do not use any load-bearing contact points other than those described in the
User guide and marked on the child restraint.
The Newborn inlay is used to protect your child and must be used up until
they have reached a height of 60 cm.
The lap belts on the harness must run as low as possible across your child's
groin to have optimum effect in the event of an accident.
Before each journey make sure that the five-point harness is correctly
adjusted and fits tightly to the child's body. The belts must never be twisted!
Only an optimally adjusted headrest can offer your child maximum protection
and comfort while ensuring that the shoulder belts can be fitted appropriately.
This car seat may only be used in conjunction with a Base Z or Base Z One
installed using ISOFIX.
6
Module Sirona Z i-Size
45cm – 105cm / ≤ 18kg
CYBEX Base Z
R129-020034
R129-020018
CYBEX GmbH
CYBEX GmbH
Riedingerstr. 18, 95448 Bayreuth
Germany
Germany
The car seat must always be correctly installed and secured in the vehicle
Module Sirona Z i-Size
76cm – 105cm / ≤ 18kg
even when not in use.
The load leg must always make direct contact with the floor of the vehicle. If your
vehicle has storage compartments in the footwell, be sure to contact the vehicle
manufacturer to ensure the floor of the vehicle can support the load leg.
While driving, the car seat must always be locked in the rearward or forward-
CYBEX Base Z
facing position.
R129-020018
CYBEX GmbH
For the car seat to provide the best possible protection, always use the linear
Riedingerstr. 18, 95448 Bayreuth
Germany
side-impact protection (L.S.P.).
If using the car seat on the middle seat of the vehicle's back bench, the linear
side-impact protection (L.S.P.) must never be folded out.
The car seat has also been tested and approved for use without the linear
side-impact protection (L.S.P) folded out.
Always ensure that the car seat is not jammed against any surface when
closing the vehicle door or adjusting the back seat.
Luggage or any other objects present in the vehicle must always be firmly
secured. Otherwise, they may be thrown within the vehicle, which could cause
fatal injuries.
The car seat must never be used without the seat cover. Ensure that only an
original CYBEX seat cover is used, as the cover is a key element allowing the
seat to function correctly.
Never leave your child unattended in the vehicle.
Parts of this child restraint system can heat up when exposed to direct
sunlight and could potentially burn your child's skin. Protect your child and the
car seat from direct sun exposure.
An accident may cause damage to the car seat that is not identifiable with
the naked eye. Please replace the car seat after an accident. In case of doubt,
please consult your dealer or the manufacturer.
Do not use this car seat for more than 8 years. The car seat is exposed to high
stress during its product lifespan, which leads to changes in the quality of its
materials with increasing age.
The plastic parts can be cleaned with a mild cleaning agent and warm water.
Never use harsh cleaning agents or bleaches!
On some vehicle seats made of sensitive materials, the use of car seats may
leave marks and/or cause discolouration. To prevent this, you can place a
blanket, towel or similar underneath the car seat to protect the vehicle seat.

Publicidad

Tabla de contenido
loading

Tabla de contenido