Indoor climate change display 1
Using the recorded measurements (inside and outside), the
weather station calculates the change to the indoor climate that
can be expected . The symbols indicate how ventilating the room
would affect the indoor climate:
The display field for outdoors 3
on the right . You can also switch the temperature unit to
(degrees Celsius) .
If
measurement range of –40 °F to 140 °F (–40 °C to 60 °C);
(RH) measured by the outdoor sensor is shown in % above
the temperature display . In addition, the channel used by the
connected outdoor sensor is shown (e .g .
■
_291952_AHFL433A1_WeatherStation_LB9.indb 16
More humid . The expected increase in humidity is
5% or higher .
Constant . The expected increase or decrease in
humidity is 4% or less .
Dryer . The expected decrease in humidity is 5% or
higher .
appears, the station has detected a temperature below the
indicates this range has been exceeded . The relative humidity
│
16
US - EN
The outside temperature is shown
with a precision of a tenth of a
degree . The temperature unit
(for degrees Fahrenheit) appears
) .
AHFL 433 A1
08.05.18 13:2