Switching The Channel - Auriol AHFL 433 A1 Manual De Instrucciones

Switching the channel

Switching the channel on the outdoor sensor
You can choose between 3 different channels . Channel 1 is set
by default .
♦
♦
♦
♦
♦
AHFL 433 A1
_291952_AHFL433A1_WeatherStation_LB9.indb 19
Open the battery compartment o on the back of the
device by removing the battery compartment cover p .
Choose a channel by moving the channel switch i to
CH 1, CH 2 or CH 3 .
Press and hold the control surface
icon on the display field for outdoors 3 blinks .
Press the TX button z to manually start the wireless signal
for the outdoor sensor . After the signal is received, the
temperature and humidity are shown in the display field
for outdoors 3 on the new channel .
Close the battery compartment o .
4 until the reception
│ 19
US - EN
■
08.05.18 13:2