Outside Mount; Important - Levolor Fabric Instalación

OUTSIDE MOUNT (OM)
STEP 1: MARKING THE BRACKET LOCATIONS
IMPORTANT: The brackets must be flush against
a flat mounting surface. Do NOT mount brackets on
curved molding.
•
Center the headrail over the window
opening at the desired height.
•
Mark screw locations for each end
bracket, 2 holes per bracket.
— Use a level to ensure all
brackets are aligned.
STEP 2: INSTALLING THE SHADE BRACKETS
•
Pre-drill screw holes using a
using pencil marks as a guide.
— If installing brackets into wood,
use supplied screws.
— If installing into drywall
or other, use anchors
in combination with
supplied screws.
•
Screw in brackets at marked
locations, 2 screws per bracket.
•
Ensure all brackets are square
with each other.
⁄ " drill bit,
1
16
Bracket
Bracket
Drywall Drywall
Anchor
Anchor
Continuous Cord Loop Lift Control–Standard Valance
INSTALLATION
Bracket
Bracket
Screw
Screw
9