Using The Bidet Functions - Kohler K-3900 Guia Del Usuario

Using the Bidet Functions

NOTE: The bidet function will automatically stop when the water level in the bowl rises above the
overflow sensor.
Using the Front Bidet Wash
Select [front].
Select [on].
Move the [pressure] scroll bar up or down to adjust the water pressure.
Move the [position] scroll bar up or down to adjust the wand position.
Move the [temp.] scroll bar up or down to adjust the water temperature.
Select [off].
NOTE: To adjust the spray, perform the "Adjusting the Spray" steps below.
Using the Rear Bidet Wash
Select [rear].
Select [on].
Move the [pressure] scroll bar up or down to adjust the water pressure.
Move the [position] scroll bar up or down to adjust the wand position.
Move the [temp.] scroll bar up or down to adjust the water temperature.
Select [off].
NOTE: To adjust the spray, perform the "Adjusting the Spray" steps below.
1132336-5-B 12 Kohler Co.