Using the Manual Clean Settings
Opening the Bowl Valve
NOTE: The bowl valve should be opened when you wish to clean the bowl without water present or in
the unlikely event a plunger is required to clear a clog.
Select [settings].
Select [cleaning].
Select [manual clean].
Select [open bowl valve]. The water should drain out of the bowl.
Clean or plunge the bowl.
Select [close] when the cleaning is complete.
Select [home] to return to the main screen or [back] to return to the previous screen.
Disable the Auto Open and Close, Auto Flush and the Motion Sensors
NOTE: If the sensors are activated the toilet will automatically close or flush while it is being cleaned. The
cover may open and close during cleaning if auto open and close are activated.
To disable auto open and close, select [settings].
Select [auto open and close].
Select [off].
Select [back].
To disable auto flush, select [settings].
1132336-5-B
28
Kohler Co.