Ingeteam NEO Manual De Instalacion Y Uso página 14
Ocultar thumbs
Ver también para NEO:
- Manual de instalación (104 páginas) ,
- Manual de usuario (64 páginas)
Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Ingeteam
2.
Install the CURVE device in the active phase of the circuit you wish to measure (general or home).
Cables that connect to the charger
3.
Attach the CURVE device to the cable using the mounting flange.
4.
Run a 1.5 mm two-wire cable between the CURVE device and the charger.
5.
Strip the cable 8 mm on each wire and connect it to the terminals of the CURVE device.
14
Mounting flange
Active phase
ABV2011IQM01_ - Installation and Operation Manual
Installation
Publicidad
Capítulos
Tabla de contenido
