Ingeteam NEO Manual De Instalacion Y Uso página 17

Installation
4. Fix the STAND element to the ground.
5. Install the charger on the STAND element. Follow points 7 to 11 of the charger assembly instructions.
CAUTION
The fasteners to be used in this case must be those provided with the STAND element and not those provided
with the charger.
CAUTION
Due to the fact that the power supply to the charger is not via the side of the charger in this case, that access
must be covered with the blind grommet provided with the charger.
ABV2011IQM01_ - Installation and Operation Manual
Ingeteam
EN
ES
FR
IT
17