Supply Power To The Charger; Installation Of The Curve Device - Ingeteam NEO Manual De Instalacion Y Uso

FRONTAL
Installation
2. Fit the caps to cover the three screws.

3.1.11. Supply power to the charger

Close the cut-off element of the electrical circuit that powers the charger.

3.2. Installation of the CURVE device

1. Select the circuit on which you wish to install the CURVE device.
At the meter output
PANEL
Home power
CURVE
METER
Contracted
power
Electric
vehicle
PANEL
power
CAUTION
The operation of the CURVE device is independent of the direction of the active phase current that passes
through it.
ABV2011IQM01_ - Installation and Operation Manual
1
2
Wall mounting: 4.8x90 screw
STAND assembly: M5x70 screw
Bypassing the home
PANEL
CURVE
Home power
METER
Contracted
power
Electric
vehicle
PANEL
power
Ingeteam
EN
ES
FR
IT
13