Installing Batteries - Walgreens WGNBPW-210 Manual

INSTALLING BATTERIES

1. Slide off the battery cover to
open the battery compartment.
2. Install or replace the 2 "AAA"
alkaline batteries according to
the indications inside the
battery compartment.
NOTE:
When removing batteries, pull black ribbon forward.
3. Replace the battery cover.
Replace the batteries if:
• The low battery symbol appears on the display.
• When any button is pressed and nothing is displayed on the screen.
NOTE:
• Date and time will need to be reset if batteries are removed or
replaced.
• Replace all batteries at one time (as simultaneous set). Do not mix
old and new batteries.
• Use only 1.5V "AAA" alkaline batteries. Do not mix alkaline, standard
(carbon-zinc) or rechargeable (Ni-Cad, Ni-MH, etc.) batteries.
• When installing batteries, observe proper +/- polarities. Incorrect
installation of batteries may cause damage to the unit.
12