Noise/Vibration Information; Ec Declaration Of Conformity - Würth EMS 350-SL COMPACT Traducción Del Manual De Instrucciones De Servicio Original

OBJ_BUCH-0000000265-001.book Page 19 Monday, August 1, 2016 4:08 PM
Only for EC countries:
According to the European Guideline
2012/19/EU for Waste Electrical and
Electronic Equipment and its implemen-
tation into national right, power tools
that are no longer usable must be col-
lected separately and disposed of in an environmen-
tally correct manner.

Noise/Vibration Information

The vibration emission level given in this information
sheet has been measured in accordance with a stand-
ardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a
preliminary assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However, if the tool is
used for different applications, with different accesso-
ries or poorly maintained, the vibration emission may
differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool is
switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the oper-
ator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organ-
isation of work patterns.
Emission values for vibration
Vibration
Classification of Würth application
tools according to vibration class
VC0
VC1
VC2
VC3
VC4
VC5
Ka
* These values are based on a work cycle consisting of no-
load and full-load operation of the same duration.
For information on the vibration class assigned to the appli-
cation tool, please see the enclosed data sheet .
EC-Declaration of Conformity
We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standarisation documents:
EN 60745-1:2009 + Cor.:2009 + A11:2010
EN 60745-2-4:2009 + A11:2011
EN 60745-2-11:2010
EN 55014-1:2006 + A1:2009 + A2:2011
EN 55014-2:1997 + Cor.:1997 + A1:2001 +
A2:2008
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 50581 : 2012 in accordance with the Directives
2011/65/EU, 2006/42/EC, 2014/30/EU.
Technical file at:
Adolf Würth GmbH & Co. KG, Abt. PPT
Reinhold-Würth-Straße 12 – 17,
74653 Künzelsau, GERMANY
Frank Wolpert
Head of Product
Management
Authorized Signatory
Künzelsau: 01.08.2016
Subject to change without notice.
Weighted
acceleration*
2
2.5 m/s
<
2
5 m/s
<
2
7 m/s
<
2
10 m/s
<
2
15 m/s
<
2
15 m/s
>
2
1.5 m/s
Dr.-Ing. Siegfried Beichter
Head of Quality,
Authorized Signatory
19