Saeco Nina plus Bar Instrucciones De Uso página 21

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44
The same procedure can be used to heat other
beverages.
9
PANNARELLO
Pannarello can be used for dispensing hot water and ejecting
steam instead of the cappuccinatore.
Remove the cappuccinatore before installing the Pannarello
(Fig.29-30):
- Loosen the ring nut without taking it off .
- Remove the cappuccinatore coupling from the steam
spout.
Install the Pannarello (Fig.31):
- Insert the Pannarello completely into the steam spout.
- Tighten the ring nut securely.
(Fig.32 - Fig.33) - Prepare the machine by using the
Pannarello as described in Sections 7 and 8 to dispense hot
water or steam.
(Fig.34 - Fig.35) - After using the machine, when it has cooled
down, remove the lower part of the Pannarello and wash it
with lukewarm water.
(Fig.36) - Once a week, remove the upper part as well and
wash it with lukewarm water.
10
CLEANING
Maintenance and cleaning must be performed only when the
machine has cooled down and has been disconnected from the
power supply.
• Do not immerse the machine in water nor place any of its
parts in a dishwasher.
• Do not use spirit, solvents and/or aggressive chemical
agents.
• We recommend cleaning the water tank and fi lling it up
with fresh water daily.
• (Fig.20) - After heating milk, brew a small quantity of hot
water as well.
Danger! If the end part of the cappuccinatore
has been removed, do not eject steam.
• (Fig.22 - 23) - Clean the cappuccinatore weekly.
In order to do this, please:
- Remove the cappuccinatore end part.
- Separate the cappuccinatore upper and lower parts.
- Wash all the cappuccinatore parts with lukewarm water.
- Wash the suction pipe with a damp cloth and remove any
milk residue.
- Assemble the cappuccinatore.
- Place the end part of the cappuccinatore in the coupling on
the machine (make sure it is completely inserted).
• (Fig.24) - Empty and clean the drip tray daily.
• Use a damp and soft cloth to clean the appliance.
• (Fig.17) - Perform the following operations to clean the
pressurized portafi lter:
- (Fig.10) - Remove the fi lter, wash it thoroughly with hot
water.
- Remove the adapter (if fi tted), and wash it thoroughly
with hot water.
- Wash the internal part of the pressurized portafi lter.
• Do not dry the machine and/or its components in a
microwave and/or in a conventional oven.
Note: do not wash the pressurized portafi lter in
the dishwasher.
11
DESCALING
Limescale builds up with the use of the appliance; the machine
needs descaling every 1-2 months and/or whenever a reduction
in water fl ow is noticed. Use the Saeco descaling solution only.
In case of confl ict, priority must be given to what
is indicated in the operation and maintenance
manual over the instructions provided on separately
sold accessories and materials.
Use the Saeco descaling solution (Fig.B). Its
formula has been designed to ensure better
machine performance and operation for its whole
operating life. If correctly used, it also avoids alterations
in the brewed product. Before starting a descaling cycle
make sure that: THE WATER FILTER (if used) HAS BEEN
REMOVED.
Never drink the descaling solution or any
products dispensed until the cycle has been
carried out to the end. Never use vinegar as a descaling
solution.
1 (Fig.11-12) - Insert the portafi lter into the brew unit from
the bottom (6) and turn it from left to right until it locks into
place.
2 (Fig.1) - Remove and empty the water tank.
3 (Fig.2) - Pour HALF the content of the Saeco concentrated
• 21 •

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ri9357/01

Tabla de contenido