Sun Visor - SCHUBERTH M1PRO Manual De Instrucciones

C. THE HELMET

11. SUN VISOR

SUN VISOR
The sun visor is scratch-resistant and uses a special polycarbonate to ensure
effective protection against harmful UV radiation.
Operation
The sun visor is operated by means of the slide
positioned on the left in the chin area, which is
easy to use even when wearing gloves. Moving
the slide towards the back lowers the sun visor,
moving it forwards retracts the sun visor inside
the inner helmet shell and locks it in position.
The sun visor can be operated irrespective of
the position of the face shield.
Note:
Only use the slide to operate the sun visor.
Caution:
Never ride in the dark or in conditions of poor visibility with the sun visor
down. Always raise the sun visor before entering a tunnel.
Caution:
Riding without the face shield or with an open face shield can result in
injury to the eyes and face from stones, dust, insects and other flying
objects. The sun visor, when lowered, will offer a certain amount of
protection from light impact from stones or insects but does not provide
protection against all hazards.
REPLACING THE SUN VISOR
The sun visor can be replaced without tools.
Tip:
To avoid fingerprints and scratches, use a soft, clean cloth (we
recommend a microfibre cloth) to hold the sun visor when removing or
installing it.
48