koban KMD-14 Instrucciones Operativas página 79

KMD-14
AUTORANGING MULTIMETER
MAX
Function
V DC or V AC
uA, mA DC/AC
A DC/AC
Resistance,
Diode test,
Continuity
Temperature
4
This symbol advises the user that the terminal(s) so
marked must not be connected to a circuit point at
which the voltage with respect to earth ground
exceeds (in this case) 500 VAC or VDC.
This symbol adjacent to one or more terminals
identifies them as being associated with ranges that
may, in normal use, be subjected to particularly
hazardous voltages. For maximum safety, the meter
and its test leads should not be handled when these
terminals are energized.
Input Limits
Maximum Input
600V DC or AC
200mA DC/AC
10A DC/AC (30 seconds max
every 15 minutes)
500V DC/AC
www.grupotemper.com