Mode Button; Range Button; Data Hold Button - koban KMD-14 Instrucciones Operativas

KMD-14
AUTORANGING MULTIMETER

MODE BUTTON

To select Diode/Continuity or DC/AC voltage, current

RANGE BUTTON

When the meter is first turned on, it automatically goes into AutoRanging.
This automatically selects the best range for the measurements being made
and is generally the best mode for most measurements. For measurement
situations requiring that a range be manually selected, perform the
following:
1. Press the RANGE button. The "AUTO" display indicator will turn
off.
2. Press the RANGE button to step through the available ranges until
you select the range you want.
3. Press and hold the RANGE button for 2 seconds to
exit the ManualRanging mode and return to AutoRanging.
(If backlight is turn on, please press BACKLIGHT button it will turn
off)

DATA HOLD BUTTON

The Data Hold function allows the meter to "freeze" a measurement for
later reference.
12 www.grupotemper.com