Care And Cleaning - Kohler K-98741 Guía De Instalación Y Cuidado

Connect the Cables (cont.)
IMPORTANT! Verify all unused holes of the PDS box have the
plugs installed.
Verify all wires are tucked into the PDS housing and will not be
pinched when securing the access cover.
Reinstall the access cover. Do not overtighten.
Connect the chroma data cable to the media module or steam
adapter. Refer to the media module or steam adapter installation
guide.
Turn on the power supply to the PDS.
Refer to the Digital Interface User Guide to test the overhead rain
panel for proper functionality.

Care and Cleaning

For best results, keep the following in mind when caring for your
KOHLER product:
• Use a mild detergent such as liquid dishwashing soap and warm
water for cleaning. Do not use abrasive cleaners that may scratch
or dull the surface.
• Carefully read the cleaner product label to ensure the cleaner is
safe for use on the material.
• Always test your cleaning solution on an inconspicuous area
before applying to the entire surface.
• Do not allow cleaners to sit or soak on the surface.
• Wipe surfaces clean and rinse completely with water immediately
after cleaner application. Rinse and dry any overspray that lands
on nearby surfaces.
• Use a soft, dampened sponge or cloth. Never use an abrasive
material such as a brush or scouring pad to clean surfaces.
For detailed cleaning information and products to consider, visit
www.kohler.com/clean. To order Care & Cleaning information, call
1-800-456-4537.
Kohler Co. 21 1207716-2-C