Thermal Fuses; Anti-Tipping - Vermeiren Venus 3 Manual De Instrucciones

3.10 Thermal fuses

01
The thermal safety device can go loose if you go up or down slopes that exceed the maximum
gradient indicated. Nominal loads that exceed the maximum permitted could also cause the device to
jump out. Likewise, if you keep on driving with the engine brake on, it could result in overload. The
maximum values not to exceed are indicated in the chapter "Technical Specifications" of the
corresponding manual.
To be able to use the scooter again, remove the overload and wait till the motor has cooled off. Then
gently press the thermal safety mechanism back in. Your scooter is now ready for use again.

3.11 Anti-tipping

To protect the motor against overload, your
scooter have a thermal safety mechanism

on the front side of the battery housing.
The thermal fuse will automatically cut the
motor to prevent overheating and thus rapid
wear and tear or breakdowns. You can
access the thermal safety device through a
gap in the back of the synthetic cover.
An anti-tipping
scooter on the back side. It is not possible to
remove these. The anti-tipping is there for
your safety. It prevents the scooter from
tipping over backward when you drive over
small obstacles that do NOT exceed the
maximum height specified.
Page 25
Venus 3, Venus 4
2014-03

is fixed to the frame of the