Thermal Fuses; Anti-Tipping - Vermeiren Venus 4 Sport Manual De Instrucciones

3.11 Thermal fuses

The thermal safety device can go loose if you go up or down slopes that exceed the maximum
gradient indicated. Nominal loads that exceed the maximum permitted could also cause the device to
jump out. The maximum values not to exceed are indicated in the chapter "Technical Specifications".
To be able to use the scooter again, remove the overload and wait till the motor has cooled off. Then
gently press the thermal safety mechanism back in. Your scooter is now ready for use again.

3.12 Anti-tipping

To protect the motor against overload, your
scooter have a thermal safety mechanism 
on the right side of the battery housing. The
thermal fuse will automatically cut the motor
to prevent overheating and thus rapid wear
and tear or breakdowns. You can access the
thermal safety device through a gap in the
back of the synthetic cover.
An anti-tipping
scooter on the back side. It is not possible to
remove this. The anti-tipping is there for
your safety. It prevents the scooter from
tipping over backward when you drive over
small obstacles that do NOT exceed the
maximum height specified.
Page 25
Venus 4 Sport
2015-08

is fixed to the frame of the