Operator Control - Vermeiren Venus 3 Manual De Instrucciones

2.10 Operator control

1 = Battery level indicator
2 = Speed switch

Turn the ON/OFF key switch (right side operator control) on, to turn the power on. Turn the
ON/OFF key switch off, to turn the power off.

Now the battery level indicator
The battery indicator on the operator control
uses a color code to indicate the approximate
power remaining in your batteries. Green
indicates (40 ~ 100 %) capacity, yellow a
draining charge (10 ~ 30 %), and red indicates
that an immediate recharge is necessary.
The battery capacity depends on the driving
time incurred and how you drive with your
scooter. Repeated starting, stopping, climbing
will consume the power more quickly.

Now turn the speed switch
a sudden change in speed may cause danger to you and others or may damage the scooter.
Slowest
setting

Grasp the handgrips.

Pull the drive lever with your fingers toward the handgrips (right lever for forward movement, left
lever for backward movement).

To sound the horn, press the horn button

To stop the scooter loosen the speed lever
Vermeiren is responsible for the changes in the software. For changes in the software contact
Vermeiren.
3 = Horn
4 = Speed lever (throttle)

will light up and shows the current level of your batteries.

to the desired driving speed. Do not adjust the speed while driving,

. Release the button to stop the horn.

under the operator control.
Page 16
GREEN
YELLOW
RED
Fastest
setting
Venus 3, Venus 4
2014-03