PULOX PO-900 Instrucciones Para El Usuario página 147

maximum
output
power of
transmitter
(W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above,
the recommended separation distance d in metres (m) can be
estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the
higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and reflection
from structures, objects and people.
Recommended separation distances between portable and mobile
RF communications equipment and the EQUIPMENT or SYSTEM –
for EQUIPMENT or SYSTEM that are not LIFE-SUPPORTING
150 kHz to 80
MHz
 
3 5 .

 
d P
 
V
1
Main probe
power
line
0.12 0.35
0.37 1.11
1.2 3.50
3.7 11.07
12 35.00
Recommended separation distances between
portable and mobile RF communications equipment
80 MHz to
800 MHz
 
3 5 .

 
d
 
E
1
0.12
0.37
1.17
3.69
11.67
and the CMS70A
800 MHz to
2.5 GHz

7


d
P

E
1
0.23
0.74
2.33
7.38
23.33


P
