EN
BEBÉDUE CARRYCOT INSTALLATION
Position the carrycot on the chassis, ensuring that it is correctly aligned so that the chassis
mountings are in line with the corresponding carrycot mountings. Fit the carrycot into the
chassis until you hear a clear "click" sound on both sides, indicating that the carrycot is correctly
in place (Fig. 9).
To complete the installation and ensure correct positioning of the carrycot, you must t the
carrycot feet into the chassis as shown (Fig. 9).
One simple way of checking correct installation is to lift up the carrycot; if it is correctly installed,
the chassis will lift up along with the carrycot.
This indicates that the carrycot is perfectly installed and xed in place.
BEBÉDUE CARRYCOT UNINSTALLATION
In order to uninstall the carrycot, rst remove the carrycot feet (Fig. 10). Then press the side
buttons and pull the carrycot upwards away from the chassis (Fig. 11).
MAINTENANCE
As in the case of other dynamic products, your carrycot requires regular maintenance in order to
avoid service issues.
· Never leave your carrycot is exposed to direct sunlight for prolonged periods of time as this may
damage fabrics and plastic components.
· Do not close up the carrycot when wet.
· Moving parts should be lubricated with Te on spray.
· Replace any broken or worn components.
· You must be aware of the risks posed by re or other heat sources such as electric radiators, gas
res, and so on when placed close to the carrycot.
· Inspect carrycot handles and base on a regular basis to detect any signs of damage or wear.
· Only use replacement parts provided by the manufacturer or supplier.
WASHING INSTRUCTIONS
For polyester parts:
· Hand wash with warm water using a
detergent for delicate fabrics.
· Hang up to dry in the shade.
· Do not machine wash.
· Do not tumble dry.
· Do not use bleach.
For eco leather parts:
· Do not dry clean.
· Do not iron.
· Do not wring garment.
· Do not tumble dry.
· Hang to dry in the shade.
· Do not use bleach or other
abrasive products.