bebeduE CC016-15V1 Manual De Instrucciones página 9

READ THESE INSTRUCTIONS CAREFULLY BEFORE USE
AND KEEP FOR FUTURE REFERENCE. YOUR CHILD'S
SAFETY MAY BE AFFECTED IF YOU DO NOT FOLLOW
THESE INSTRUCTIONS.
BEBÉDUE CARRYCOT
IMPORTANT
This carrycot must "only" be installed in the BebéDue chassis.
This carrycot has been designed for babies aged 0 to 6 months.
It has 4 feet on the base so that it can be rested on any surface.
Never leave your child unattended.
HOW TO ASSEMBLE THE CARRYCOT
In order to assemble the carrycot, remove the padding in order to reveal the base.
Slide the two bars of the frame until they enter the slots in the base with a "click" sound (Fig. 1).
Replace the padding and carrycot cover (Fig. 2). Make sure you attach the velcro fastenings as
shown (Fig. 3).
HOW TO RAISE AND LOWER THE CANOPY
In order to raise and lower the canopy, press the two side buttons while moving the canopy
into the desired position (Fig. 4). The canopy has a carry handle (Fig. 5). The canopy also has
three sections allowing you to vary its position (Fig. 6).
HOW TO ASSEMBLE THE FOOT COVER
Position the foot cover on the carrycot and attach the side toggles onto the carrycot, pulling
the foot cover down to ensure a perfect t (Fig. 7).
STEPS TO FOLLOW BEFORE INSTALLATION
Firstly, install the carrycot adapters as shown (Fig. 8).
Then open the chassis and apply the back wheel brakes.
EN