Steren TEL-250 Manual De Instrucciones página 34

Conference function
1. When line 1(line2) is in communication, line2 (line1) coming in a call, the 2L
(1L) icon will flash on the screen. Press "CONF" key to enter conference mode
directly or press "HOLD".
2. Press "LINE2" ("LINE1") key, line 2 (line1) is switch on and line 1(line2) is in
holding automatically.
3. Press "CONF" key to enter Conference conversation (three-way talking).
4. Return the handset to the base or press "H.F" key, line1 and line2 are hung
up together.
Hold two lines while conference conversation (hands-free
state).
1. At hands-free conference mode, press "HOLD" key.
2. Line1 and line2 enter the hold mode together.
3. Pick up handset and line1 connected automatically then talk over handset of
line1, line2 still in hold state.
4. After finished of line1, press "LINE2" key to talk over handset of line2.
5. After finished of line2, return the handset to the base.
Note:
In conference conversation (three-way talking) mode: Press "LINE1" ("LINE2")
key, the line1 (line2) hang up, line2 (line1) is on the line continual.
10 10