Publicidad
Step 14
Carefully stand your unit upright.
å
We recommend using the SAFETY BRACKET (1G)
å
for added stability. Use a BLACK 9/16" LARGE HEAD
SCREW (1S) into the top of the unit and a BLACK 1-7/8"
FLAT HEAD SCREW (2S) into a stud in your wall.
To insert the drawers into your unit, tip the front of the
å
drawers down and drop the rollers on the drawers behind
the rollers on the unit. Lift the front of the drawers up and
slide them into the unit.
Apply the WARNING LABEL (5L) to the upper DRAWER
å
BOTTOM (D704). You should be able to read the label
when the drawer is open. When the drawer is closed, it will
hide the label. Peel off the backing and apply the label as
shown in the diagram.
NOTE: This is a permanent label intended to last
å
for the life of the product. Once applied, do
not try to remove it.
5L
www.sauder.com/services
40 lbs.
D704
30 lbs.
30 lbs.
30 lbs.
30 lbs.
BLACK 1-7/8" FLAT HEAD SCREW
(1 used into a stud in your wall)
1G
BLACK 9/16" LARGE HEAD SCREW
(1 used into the top of your unit)
Serious or fatal crushing injuries can
occur from furniture tip-over. To help
prevent tip-over:
-Place heaviest items in the lowest drawers.
-Unless specifi cally designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
-Never allow children to climb or hang on
drawers, doors, or shelves.
-Never open more than one drawer at a time.
-If equipped with a drawer interlock system, do not
defeat or remove it.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
416532
Pro Tip: Lift with your
legs. And, you know,
your arms.
2S
1S
WARNING
Page 17
Publicidad
