Publicidad
Step 9
Fasten a METAL BRACKET (4G) to the BOTTOM (D). Use a
å
BLACK 9/16" LARGE HEAD SCREW (1S).
NOTE: The METAL BRACKET should be even with the edge
å
of the BOTTOM.
Fasten the BASE (I) to the ENDS (A and B) and BOTTOM (D).
å
Tighten two HIDDEN CONNECTORS and use a BLACK 9/16"
LARGE HEAD SCREW (1S) through the METAL BRACKET
and into the BASE.
4G
Page 12
Curved edge
I
D
A
How to use the HIDDEN CONNECTOR
To fasten two parts together using the
HIDDEN
CONNECTORS,
screwdriver, at an angle, into the slot in the
HIDDEN CONNECTOR. While pushing the
screw into the hole of the adjoining part,
turn the screwdriver clockwise to tighten.
BLACK 9/16" LARGE HEAD SCREW
B
insert
your
416532
Don't worry. It isn't
Rome. This can be built
in a day.
1S
(2 used in this step)
www.sauder.com/services
Publicidad
