Add Or Remove Additional Remote - Levolor Sheer Shadings Manual De Instalación

Programming
Disable Limit Setting
After all programming is complete, lock the remote to
prevent accidental or unintended changes to motor
direction, travel limits, and operating mode.
Remove cover from back of remote and locate the
1
lock switch between the P2 buttons above batteries.
Move the switch to the left to lock. Remote will
2
display "L" (lock).
Move the switch to the right to unlock and access all
3
remote functions. Remote will display"U" (unlock).

Add or Remove Additional Remote

Channels can be copied to an additional remote as an
exact duplicate of the current remote programming.
On the current remote, select the channel to
1
copy then press one P2 button in the battery
compartment of the remote until motor jogs x 1
and/or beeps x 1.
Once more, on the current remote, press one P2
2
button in the battery compartment of the remote
until motor jogs x 1 and/or beeps x 1.
On the new remote, select the channel to copy
3
to then press one P2 button in the battery
compartment of the remote until motor jogs x 2
and/or beeps x 3.
NOTE: Repeat steps 1-3 to remove additional remote control.
Remote Control Guide
13
Home