Installation Inside Mount - Levolor Roman Shades Instalación

INSTALLATION
INSIDE MOUNT (IM)
STEP 2: INSTALLING THE BRACKETS
•
Pre-drill screw holes using a
using pencil marks as a guide.
•
Hold the bracket with the surface marked "Top" facing up. Line up the pre-drilled
screw holes and the longer, oblong holes in the bracket.
•
While holding the bracket in place, secure the bracket with screws, 2 screws
per bracket.
•
Repeat for each bracket.
•
Ensure all brackets are square with each other.
10
Corded Lift Control
Bracket
Bracket
Screw
Screws
⁄ " drill bit (wood and metal mounting surfaces only)
1
16