Kohler Devonshire K-394 Guia De Instalacion página 3

Escutcheon
Apply
Plumbers
Putty
Metal
Washer
1. Spout Installation
- Apply a bead of plumbers putty or other sealant to the underside of
the escutcheon according to the putty manufacturer's instructions.
- Press the escutcheon in place over the spout hole in the lavatory.
- Fit the spout through the escutcheon/spout hole.
- Install the metal washer and nut. Position the washer so the second
hole lines up with the drain lift rod hole. Securely wrench tighten the
nut.
- Remove any excess putty or sealant.
2. Handle Body Installation
- Apply a bead of plumbers putty or other sealant to the underside of
the escutcheons according to the putty manufacturer's instructions.
- Insert the handle bodies into the mounting holes from the top of the
lavatory. Make sure the body marked Cold" is installed in the
right hand hole (as viewed from the front of the lavatory).
Kohler Co.
Handle
Escutcheon
Apply Plumbers
Putty
Nut
3
Handle
Body
A
1012739-2-