Kohler Devonshire K-394 Guia De Instalacion página 8

Stopper
Flange
Nut
Body
Seal
Nut
5. Drain Installation–Style B
- Slide one end of the clip onto the rod. Slide the link onto the rod
with the thumb screw facing the back of the lavatory.
- Squeeze the other end of the clip, aligning the hole with the rod.
Move the link to the proper position by squeezing the clip and
sliding it along the rod.
- Insert the lift rod into the hole in the faucet and then into the
appropriate hole in the link. The stopper should lift about 3/8"
(1cm) when opened. If necessary, you may bend the link to fit your
installation.
- Tighten the thumb screw on the link so the lift rod knob extends
1/2" (1.3cm) above the lift rod hole.
A
1012739-2-
Lift Rod
Faucet
Rod
Rod
Style B
Clip
continued
8
1/2"
(1.3cm)
Thumb
Screw
Link
Kohler Co.