Security Mode; Playing Recorded Files - Pioneer VREC-170RS Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 187

Security Mode

When the power supply to this product is turned off (vehicle engine is turned off, or the cigarette
lighter power cable is removed), the Security Mode is activated for a fixed period of time. The maximum
operation time is approximately 40 minutes.
When this device detects vehicle movement caused by vibration while the Security Mode is activated,
that event is saved for 60 seconds as a parking mode file. After recording has completed, the Dash
Camera will automatically shut down. If there is parking surveillance video recorded, the user is
prompted with the option to view the recorded video.
Notes
In this manual, Parking Mode is also referred to as Security Mode as the feature name
The Security Mode and be set to on or off.
You can adjust the sensitivity for detecting vibration.
→"This product Settings" - "Configurable Features" - "Security Mode" - "Sensitivity"
Vibration that is detected for approximately three minutes after power supply to this device is stopped,
and for approximately three minutes before power supply is started, is not covered by the notification
message display feature.
If any video is recorded 3 minutes after the user stops the vehicle and turns off the ACC power, and 3
minutes before the user gets on the car and starts the engine, the triggered event will not be prompted.
However, the recorded files are also stored in the Parking folder.
The recording time may differ depending on the conditions.
Notes
If the product records a parking event after 'ACC OFF' from the dormant state, the screen will remain
off and the recording will start in the background.

Playing Recorded Files

Automatic Recording by Detecting Impacts (Event Recording)
In each of the screens displayed from here on, the Monitor Display (screen) automatically goes black if
you do not perform any operation for approximately 60 seconds.
(This is the Monitor Display default setting).
Video recording does not commence whilst the user is in any menu operation.
You can play recorded video files.
1 Press the Playback recorded media button.
− 24 −

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido