Sunny SF-RW5910 Manual Del Usuario página 12

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
Fig A
STEP 2：
2-1: Attach the Slide Rail (No. 3) to
the Main Frame (No. 1) with the 2
Bolts (No. 5 & 10) by using Allen
Wrench (No. 101 & 100). Then tighten
with Knob (No. 36) and Flat Washer
(No. 37), and finally insert Spring
Knob (No. 34).
2-2: Connect the 2 Sensor Wires (No.
40) with 2 Extension Wire (No. 29).
2-3: After connecting the 2 Sensor
Wires (No. 40) with 2 Extension Wire
(No. 29). The wires will be exposed.
(Fig A)
2-4: Move all wires to the side of the
plate A. (Fig B)
2-5: Attach the Protective Cover (No.
88) and Fixed Plate (No. 89) to the
Main Frame (No. 1) with 4 Screws
(No. 19) and 4 Flat Washers (No. 17)
using Allen Wrench (No. 100).
Note: Do not cut any wires when
attaching the Protective Cover (No.
88) and Fixed Plate (No. 89) to the
Main Frame (No. 1).
Fig B
11