Sunny SF-RW5910 Manual Del Usuario página 13

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
Fig A
Fig B
STEP 3:
3-1: Remove the pre-assembled 2
Screws (No. 43) from the Main Frame
(No. 1) using Spanner (No. 99). Attach
the Bottle Holder (No. 44) to the Main
Frame (No. 1) with 2 Screws (No. 43)
that were just removed by using
Spanner (No. 99).
3-2: Remove the pre-assembled 6
Screws (No. 41) from the back Meter
(No. 39) using Spanner (No. 99).
3-3: Insert the Tablet Holder (No. 45) to
the Meter (No. 39) with 2 Screws (No.
41) that were just removed by using
Spanner (No. 99).
3-4: Connect 2 Extension Wires (No.
29) with wires of Meter (No. 39). Then
attach the Meter (No. 39) to the Meter
Plate (No. 7) with 4 Screws (No. 41)
that were just removed by using
Spanner (No. 99).
3-5: After attaching the Meter (No. 39)
to the Meter Support Tube (No. 2). The
2 Extension Wires (No. 29) and wires
of Meter (No. 39) will be exposed. (Fig
A)
3-6: Push all wires into the upper Meter
Support Tube (No. 2). The wires will be
exposed out of hole A from the bottom
Meter Support Tube (No. 2). Push all
wires up into the Meter Support Tube
(No. 2). (Fig B)
Note: Put all wires to the meter tube
before attaching the Meter (No. 39) to
Main Frame (No. 1).
The assembly is complete!
12