Sunny SF-RW5910 Manual Del Usuario página 16

ADJUSTING THE BALANCE
Adjust the Hex Nuts (No. 32) on the Adjustable Foot
Pads (No. 33) of the rower using Spanner (No. 99) if the
rower is unbalanced during use.
CAUTION!
Moving parts, such as the Seat (No. 30), can crush and
cut. Keep hands clear of the Slide Rail (No. 3) during
use!
STORAGE
Fig A
Fig A
CAUTION!
Move the Seat (No. 30) to the
front of Slide Rail (No. 3) first
or it will glide down when
raising the rower up!
PEDAL ADJUSTMENT
The pedal strap is adjustable and can be personalized to fit the user's foot size.
ADJUSTMENTS GUIDE
MOVING THE ROWER
To move the rower, lift up the Rear Support Tube (No. 4) until the
Rollers (No. 85) touch the ground. With the Rollers (No. 85) on the
ground, you can transport the rower to the desired location with ease.
CAUTION!
Move with caution
when you raise the
rower up, as your head
may touch the Rear
Support Tube (No. 4).
When not in use, you can save space by storing the rower
vertically. Unscrew the Knob (No. 36) and Flat Washer (No.
37), and remove the Spring Knob (No. 34). (Fig B) Lower the
Seat (No. 30) all the way down. Then fold the Slide Rail (No. 3) up.
CAUTION: The Seat (No. 30) will slide down when folding the Slide
Rail (No. 3).
Insert Knob (No. 36) and Flat Washer (No. 37) into the holes
in the back of the Slide Rail (No. 3) and tighten. Then insert
Spring Knob(No. 34). (Fig A)
If not using the rower for more than a month, empty the tank
before storing.
15
Fig B