Trouble Shooting - Grizzly ERT 230 Traducción Del Manual De Instrucciones Original

GB

Trouble shooting

Problem
Trimmer vibrates
Trimmer does not
start
Poor cutting perfor-
mance
24
Possible cause
Spool ( 11) is dirty
Spool ( 11) is defec-
tive
NetNo mains power
ON / OFF switch (
defective
Worn carbon brushes
Motor is defective
Line spool ( 11) does
not have sufficient line
Line has not been con-
ducted out of the spool
Remedy
Clean spool
(see "Cleaning and maintenance")
Exchange spool
(see "Cleaning and maintenance")
Check cable, line, plug; repair by
qualified electrician
1)
Repair by After-Sales Service
Lengthen cutting line
(see "Operation")
or exchange spool
(see "Cleaning and maintenance")
Remove spool and lace line through
opening outwards and return spool.