Trouble Shooting - Grizzly ERT 450/8 Traducción Del Manual De Instrucciones Origina

UK

Trouble shooting

Problem
Trimmer vibrates
Trimmer does not
start
Poor cutting per-
formance
124
Possible cause
Spool ( 19) is dirty
Spool ( 19) is defective
No mains power
ON / OFF switch (
defective
Worn carbon brushes
Motor defective
Line spool ( 19) does not
have sufficient line
Line has not been conduct-
ed out of the spool (
or only on one side
Remedy
Clean spool
(see "Cleaning and maintenance")
Exchange spool(see "Cleaning and
maintenance")
Check cable, line, plug; repair by
qualified electrician
3)
Repair by After-Sales Service
Lengthen cutting line
(see "Operation")
or exchange spool
(see "Cleaning and maintenance")
Remove spool and lace line through
19)
opening outwards and return spool.