Startup Behavior - Siemens SITRANS LR560 Manual De Inicio Rápido

Loop Power
Allowable operating area of SITRANS LR560
Loop Voltage versus Loop
Resistance

Startup Behavior

• The device draws less than 3.6 mA at startup.
• Time to first measurement is less than 50 seconds
Wiring setups for hazardous area installations
The following wiring options are available for hazardous area installations:
Non-Sparking/Energy Limited wiring (Europe) and Dust Ignition Proof wiring (Europe/
•
International)
on page 16
Non-incendive and Dust Ignition Proof wiring (US/Canada)
•
In all cases, check the device label on your instrument, and confirm the approval rating.
1) Non-Sparking/Energy Limited wiring (Europe) and Dust Ignition
Proof wiring (Europe/International)
The ATEX certificate listed on the device label can be downloaded from the product page of
our website at: www.siemens.com/sitransLR560. Go to Support > Approvals/Certificates.
The IECEx certificate listed on the device label can be viewed on the IECEx website. Go to:
http://iecex.iec.ch and click on Ex Equipment Certificates of Conformity then enter the
certificate number IECEx SIR 09.0149X.
• For power demands, see
• For wiring requirements follow local regulations.
Instructions specific to hazardous area installations
• See also
certificate listed above.
Page EN-16 SITRANS LR560 (HART) – QUICK START MANUAL
LR560 HART Loop Operating Area
Loop Voltage (V)
Loop Power
on page 16.
Operation
with HART
on page 17
on page 17 and the ATEX
7ML19985XF81