Set Your Printing Preferences; Default Printable Area Settings; Set Your Printing Preferences On A Windows Pc; Access Printing Preferences (Pc) - Rimage Everest 600 Guia Del Usuario

Set your Printing Preferences

This section provides the information needed to set up your printing
preferences and check the amount of print and retransfer ribbon remaining
using a Windows PC or a Macintosh.

Default Printable Area Settings

Most discs have the following printable areas:
Disc without stacking ring:
Outer Diameter 118 mm
•
Inner Diameter 24 mm
•
Set Your Printing Preferences on a
Windows PC
Printing preferences allow you to set up your Everest 600 printer to produce
the best possible labels on your discs.
Important: Unless otherwise indicated, all Windows navigation statements
are Windows 7 paths. Other Windows operating systems' navigation may
differ slightly.
2001474_B
Disc with stacking ring:
Standard Area:
Outer Diameter 118 mm
•
Inner Diameter 38 mm
•
Hub Area:
Outer Diameter 35 mm
•
Inner Diameter 17 mm
•
For more information visit

Access Printing Preferences (PC)

Use one of the procedures below to access the Everest 600 Printing
Preferences.

Access Printing Preferences through the Windows Start Menu

Using this method, printing preferences are saved in the printer driver
settings and are applied to all newly created labels.
1. Select: Start > Devices and Printers.
Tip: In Windows XP, select Start > Printers and Faxes. Navigational
statements for Windows Server 2008 will be the same as Windows 7.
2. Right-click the Everest 600 printer. The dropdown menu displays.
3. Select Printing Preferences. The Rimage Everest 600 Printing
Preferences dialog box opens.

Access Printing Preferences through CD Designer

Using this method, printing preferences are saved with the label file and are
used instead of the printer driver settings.
1. Open the desired label file in CD Designer.
2. From the File menu, select Print. The Print window opens.
3. From the Name dropdown list, select the Everest 600 printer.
4. Select the Document Properties button. The Rimage Everest 600
Properties dialog box opens.
rimage.com/support
11